BGXJB - EZ WELD PIPE CLEANER (FOR PVC PIPE)
- MSDS: BGXJB
- Manufacturer: P C I INDUSTRIES INC
- Product Name: EZ WELD PIPE CLEANER (FOR PVC PIPE)
- National Stock Number: 6850-01-298-3770
Product Identification
Product ID:EZ WELD PIPE CLEANER (FOR PVC PIPE)
MSDS Date:01/01/1992
FSC:6850
NIIN:01-298-3770
MSDS Number: BGXJB
Responsible Party
RIVIERA BEACH, FL 33404
US
Emergency Phone: 305-844-0241
Info Phone: 305-844-0241
Preparer: HARRY AUSTIN
Cage: FO334
Contractor
Telephone: (305) 844-0241
Cage: FO334
Ingredients
ACETONE (SARA III)
CAS: 67-64-1
RTECS: AL3150000
Fraction By Weight: 90%
OSHA PEL 1000PPM
ACGIH TLV: 750PPM/1000STEL;9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: 10%
OSHA PEL 200 PPM/300 STEL
ACGIH TLV: 200 PPM/300STEL 9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHALATION OF VAPORS OR MIST
MAY CAUSE RESPIRATORY IRRITATION, CNS DEPRESSION. CONTACT WITH SKIN
AND EYES MAY CAUSE IRRITATION. SWALLOWING MAY CAUSE DIGESTIVE TRACT
IRRITATION AND CENTRAL NERVO US SYTEM DEPRESSION. CHRONIC:
PROLONGEDOR REPEATED EXPOSURE MAY CAUSE DERMATITIS, CNS EFFECTS,
EYE DAMAGE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYE:IRRITATION,BURNING. SKIN:DRYING,
DEFATTING,DERMATITIS. INHALED:RESPIRATORY
IRRITATION,HEADACHE,NAUSEA, DIZZINESS,VOMITING. INGESTED:G/I
IRRITATION,NAUSEA,VOMITING,DIARRHEA.
Medical Cond Aggravated by Exposure:NONE REPORTED.
First Aid
First Aid:EYE:FLUSH WITH WATER 15 MIN. SKIN:REMOVE CONTAMINATED
CLOTHING. WASH AREA WITH SOAP AND WATER. INHALED:REMOVE FROM
EXPOSURE. GIVE ARTIFICIAL RESPIRATION OR OXYGEN IF NEEDED.
INGESTED:DO NOT INDUCE VOM ITING. GIVE WATER OR MILK. (NOTHING BY
MOUTH IF UNCONSCIOUS).GET IMMEDIATE MEDICAL CARE. IF SYMPTOMS
PERSIST OR ARE SEVERE,GET MEDICAL CARE.
Fire Fighting
Flash Point Method:TCC
Flash Point:4F,-16C
Autoignition Temp:Autoignition Temp Text:1000F
Lower Limits:3
Upper Limits:13
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM, WATER FOG.
Fire Fighting Procedures:WEAR SELF CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:VAPORS ARE HEAVIER THAN AIR. THEY MAY
TRAVEL ALONG THE GROUND AND "FLASH-BACK" FROM A DISTANT IGNITION
SOURCE.
Accidental Release
Spill Release Procedures:VENTILATE AREA & ELIMINATE IGNITION SOURCES.
WIPE UP OR ADSORB WITH INERT MATERIAL. PLACE IN CLOSED CONTAINER
SEPARATE FROM IGNITION SOURCES.
Neutralizing Agent:NONE
Handling
Handling and Storage Precautions:STORE IN A COOL,DRY,WELL VENTILATED
AREA. KEEP AWAY FROM IGNITION SOURCES AND STRONG OXIDIZING AGENTS.
Other Precautions:CONTAINERS OF THIS MATERIAL MAY BE HAZARDOUS WHEN
EMPTIED SINCE SUCH CONTAINERS MAY RETAIN PRODUCT RESIDUES. ALL
HAZARD PRECAUTIONS GIVEN IN THIS DATA SHEET MUST BE OBSERVED FOR
THE EMPTY CONTAINER.
Exposure Controls
Respiratory Protection:NONE EXPECTED TO BE NECESSARY. FOR REPEATED/
PROLONGED USE WHERE PEL/TLV ARE EXCEEDED,USE NIOSH/MSHA RESPIRATOR
FOR ORGANIC VAPORS. USE IN ACCORDANCE WITH 29 CFR 1910.134.
Ventilation:NORMAL ROOM VENTILATION. SUPPLEMENT WITH LOCAL EXHAUST IF
NECESSARY TO MAINTAIN EXPOSURE BELOW TLV/PEL.
Protective Gloves:RUBBER,PLASTIC,OTHER IMPERVIOUS.
Eye Protection:SAFETY GLASSES OR SPLASH GOGGLES.
Other Protective Equipment:EYE WASH STATION & SAFETY SHOWER. CLOTHING
TO PREVENT PROLONGED OR REPEATED SKIN CONTACT.
Work Hygienic Practices:USE GOOD INDUSTRIAL HYGIENE PRACTICE. AVOID
UNNECESSARY CONTACT.
Supplemental Safety and Health
PRODUCT IS CLEANER FOR USE WHEN INSTALLING PIPE. STOCK NO IS R-4001.
Chemical Properties
HCC:F2
Boiling Pt:B.P. Text:132F,56C
Vapor Pres:185 MM HG
Vapor Density:2 (AIR=1)
Spec Gravity:0.8 (WATER=1)
Evaporation Rate & Reference:5.5 (N-BUTYL ACETATE=1)
Solubility in Water:APPRECIABLE
Appearance and Odor:COLORLESS LIQUID, STRONG SOLVENT ODOR
Percent Volatiles by Volume:100
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:HEAT,IGNITION SOURCES. CONTACT WITH
INCOMPATIBLE MATERIALS.
Hazardous Decomposition Products:OXIDES OF CARBON
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH FEDERAL, STATE, LOCAL
REGULATIONS. MANUFACTURER SUGGESTS INCINERATION.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.